mad00040aem MN101E02G ram ( 16-bit) 18 k rom ( 16-bit) 128 k type MN101E02G [es (engineering sample available)] package qfp084-p-1818e *lead-free minimum instruction execution time 100 ns (at 3.135 v to 3.465 v, normal-mode) interrupts external (7 lines) internal (15 lines) : timer 4, a/d 1, reset 1, osd 1, serial 2, teletext decoder 2, i 2 c 1, caption 1, remote control 1, hsync 1, vsync 1 timer counter 8-bit timer 4 watchdog timer: time-out period is selectable. serial interface i 2 c 1: for multimaster mode, bus line (output) has 2 systems sync serial / uart 1 caption/teletext decoder ? built-in sync separator 1 i/o pins 35 common use i/o a/d inputs 10-bit 8-ch. (with s/h) pwm 8-bit 6-ch. special ports remote control reception crtc 1-layer display (graphics, characters, splits) notes remote control input discriminant circuit built-in, build-in ntsc/pal (bghidk, m, n)/secam/ntsc443 video signal processing circuit, built-in 3-line comb filter (ntsc) built-in adaptive 2-line comb filter (pal) 1 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 vdd(vpp)* 2 p07,adin7,vdaf p06,adin6,hdaf p05,adin5 dvdd dvss p04,adin4 p03,adin3 p02,adin2 p01,adin1 p00,adin0 mmod osc2 osc1 pdo vcoi avdd avss bout siref scomp p33,irq3 p34,irq4 vsync p36,pwm4 pipys pipyin pipvin pipuin avdd avss vrefh vrefm mcompin vrefl mscin crefh mvin clh muin cll crefl p10,rmin,irq0 * 1 p11,sda0 * 1 p12,scl0 * 1 p13,pwm p14,vout0 p15,sbt0 p16,sbd0 p17,sbo0 * 1 p20,sda1 * 1 p21,scl1 * 1 p22,pwm0 p23,pwm1 p24,pwm2 dvdd dvss p25,sysclk * 1 p26,tm0io * 1 p27,tm1io p30,nrst p31,irq1 p32,irq2 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 gout rout viref vcomp vmout avdd fbpin avss ew vout avdd fscout fscin fpco avss fvcoi hout hdown ehtin beamin ablin MN101E02G support tool pin assignment qfp084-p-1818e * lead-free * 1: 5v dielectric nch open drain output pin * 2: mask rom=vdd, flash memory built-in type=vpp mad00040aem MN101E02G type mn101ef02g [es (engineering sample) available] rom ( 8-bit) 128 k ram ( 8-bit) 18 k minimum instruction execution time 100 ns package qfp084-p-1818e *lead-free flash memory built-in type in-circuit emulator px-pac101e02-4w9j 2 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. no license is granted in and to any intellectual property right or other right owned by panasonic corporation or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20080805 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
